







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in Boulder City, NV: How to Tell Which One Your Kitchen Needs
Choose refacing if your original cabinet boxes pass a physical inspection: face frames solid and tight, upper boxes at least 11 inches deep, lower boxes at least 23 inches deep, and drawer bodies that still slide and hold. Choose full replacement if the boxes fail any of those tests. In Boulder City, refacing is the right answer about 60% of the time. The other 40% of the time, the original box is too shallow, too damaged, or too out of square to hold a new door for more than a few years. Call (855) 552-7882 and we’ll tell you which situation you’re in before you spend a dollar.
Most decision guides skip the part that actually decides the job. They give you a cost chart and send you on your way. That chart assumes your existing boxes are a known quantity. In Boulder City, they usually aren’t.

Why the Box Matters More Than the Door in Boulder City
Drive through the historic core of Boulder City and you’re looking at Boulder Dam-era housing, most of it built in the 1930s and 1940s for dam workers. Small single-story stucco cottages, Pueblo Revival details, original concrete foundations. Those kitchens have been renovated at least once, often two or three times, and the cabinets underneath the current doors are frequently the originals from that first build.
That changes the question. A 2024 flip in Henderson might have 1990s boxes that are perfectly sound. A 1941 cottage off Nevada Way might have face frames that were stapled rather than glued, drawer boxes assembled the same way, and a coat of paint that’s been recoated so many times the surface won’t take a new veneer. You can’t see any of that from a photo, and no cost comparison chart will tell you.
This is why our Kitchen Remodeling team starts every refacing conversation with a physical inspection of the boxes, not a quote. The written price we hand you names the box condition at inspection as the basis for our recommendation, so you know exactly what we found and why we’re steering you one way or the other.
The Three Box Conditions That Make Refacing the Right Answer
Refacing replaces the doors, drawer fronts, and veneer on the visible surfaces while the original boxes stay in place. It works beautifully, and it’s genuinely less expensive than full replacement, but only when all three of these are true:
- The face frame is solid with no joint separation. Run your hand along every joint where the frame meets the box. If you can feel movement, a gap, or a crack that opens when you lean on it, the frame won’t carry new door weight reliably.
- Box depth is at least 11 inches for uppers and 23 inches for lowers. Modern hardware needs the room. Anything shallower and you’re choosing between doors that don’t close flush and drawer slides that won’t fit.
- The drawer bodies are functioning. Open and close every drawer. Listen for the rattle of a loose bottom panel or a joint that’s given up.
When all three pass, refacing with a Wellborn or KraftMaid door family gives you a named-brand result, with manufacturer warranties that travel with the finished project, at a meaningfully lower cost than starting from bare wall.

The Conditions That Make Replacement the Right Answer
Replacement isn’t the “better” choice. It’s the necessary one when the boxes can’t carry a new face. We see three failure patterns most often in Boulder City kitchens:
- Drawer bodies with failing dovetail or stapled joints. Original 1940s construction often stapled drawer boxes rather than gluing them. Eight decades of desert heat cycling through a kitchen will finish what time started. Once those joints open, no amount of new hardware saves them.
- Face frames that have been repainted too many times. A veneer or door needs a stable surface to bond to. When the paint has built up and started to fail underneath, the new face lifts within a year.
- Boxes under 10 inches deep. Full-extension drawer slides, which most families expect in a modern kitchen, need depth to operate. A 9-inch upper can’t get there.
If two or more of these apply, replacement is the honest call. A full KraftMaid or Wellborn installation also gives you something refacing can’t: a single, consistent wood species and finish across every box, with period-appropriate door profiles specified throughout. In a historic-district kitchen where beadboard, raised panel, or inset doors are the right match for the house, that consistency is the difference between a renovation that looks original and one that looks patched.
What Happens When You Reface a Compromised Box
Here’s the hidden cost almost nobody mentions. If the face frame starts pulling away from the wall after the new door weight is applied, the entire job has to be redone. New veneer, new doors, new labor. The lower upfront cost of refacing becomes the more expensive long-term choice, and you’ve paid for the work twice.
We’d rather lose the refacing sale than sell you a job that fails in eighteen months. That’s why the box inspection comes first and the written price follows it.
Cabinet Refacing vs Replacement: A Side-by-Side
| Factor | Refacing | Full Replacement |
|---|---|---|
| Typical cost in Boulder City | Lower end of the $4,000-$13,000 cabinet installation range | Upper end, up toward the $14,000-$45,000 kitchen remodel range |
| Boxes required | Solid frame, 11″/23″ minimum depth, working drawers | None; old boxes come out |
| Historic-period consistency | Limited by mixed-era original boxes | Full control across every cabinet |
| Timeline | Faster, less disruption to a working kitchen | Longer, with a defined period without functioning cabinets |
| Risk if boxes are compromised | Whole job redone | None; boxes are new |
Common Local Scenarios in Boulder City
The 1942 cottage in the historic district. Original boxes, two renovations deep, face frames repainted. About half the time we open a drawer and find stapled joints that have given up. Replacement wins here, and period-appropriate profiles matter because exterior work in the historic district already runs through Historic Preservation Commission review. Homeowners who care about the whole house looking period-correct tend to care about the kitchen too.
The mid-century ranch on the outskirts. Solid 1960s boxes, proper depth, working drawers. Refacing with a Wellborn door family brings the kitchen forward without touching the footprint. Lower cost, faster turnaround, and the family keeps their kitchen for most of the project.
The 1990s infill update near Lake Mead. Boxes are fine. The doors are what’s dated. Clean refacing candidate, and the quote usually lands near the lower end of the cabinet installation range.
The 365-Day Done Right Promise, Applied to Either Choice
Whatever we recommend, the work is covered by the 365-Day Done Right Promise: if it isn’t done right after the job is complete, we make it right. That commitment covers the three things you’ll notice first if an installation wasn’t right, door alignment, hinge adjustment, and drawer-slide operation, and it’s stamped on every project, reface or replacement.
Because we’re a Cedarwell company, the same Cedarwell Care Promise applies on every visit. Shoe covers at the door. Drop cloths on the floors. Quiet tools during nap and school hours where we can manage it. Pet-safe product choices where there’s a real option. A photo of the clean-up before the crew leaves, so you have proof the house was left right. Our technicians have up to 21 years of experience, and they’re background-checked and uniformed, so you know exactly who’s walking through the door. A live person answers the phone 24/7. No voicemail, no bot, no waiting until Monday.
Desktop comparison charts are useful. A physical inspection answers the question. When you’re ready to have the boxes looked at, our home page is the best place to start planning the rest of the renovation alongside it.
FAQs
Cabinet installation in Boulder City runs $4,000-$13,000, with refacing typically landing at the lower end of that range and full replacement at the upper end. A full kitchen remodel, which includes replacement cabinets plus counters, backsplash, and related work, runs $14,000-$45,000. Refacing is generally the cheaper option when the boxes pass inspection. Call (855) 552-7882 for an exact quote on your kitchen; estimates are free.
No. Box condition, drawer joint integrity, and frame-to-wall attachment are things we have to check in person, and that’s what determines whether refacing will hold. That’s why our written price names what we found at inspection as the basis for the recommendation. Call (855) 552-7882 and we’ll set up the assessment.
Repair and reface are cheaper up front when the boxes are structurally sound, and that’s the case in most mid-century and later kitchens. In original 1940s construction, failing drawer joints and over-painted face frames are common enough that replacement often comes out ahead once you account for the risk of a failed reface. Call (855) 552-7882 and we’ll walk you through which one your kitchen matches.
We schedule cabinet assessments in Boulder City within a few business days, and if you’re weighing refacing against replacement, the inspection is the first step either way. Calls are answered by a live person 24/7, so you can reach us whenever it’s convenient. Call (855) 552-7882 to get on the schedule.
If you’d rather have it looked at than keep researching, Elmstead Remodeling Boulder City offers a no-pressure assessment in Boulder City: we inspect the boxes, name the condition, and put the recommendation and the written price in your hands before any work starts. Call (855) 552-7882 for a free estimate. For the full scope of what we handle, see our Kitchen Remodeling in Boulder City page.
Written by the team at Elmstead Remodeling Boulder City, serving Boulder City, NV.


