A Elmstead company - serving Boulder City, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Toto · Boulder City

Toto Construction Service in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Boulder City Homeowners Choose Toto Construction

We provide independent Toto fixture service and installation in Boulder City, NV, working on Toto toilets and Washlets as a remodeler rather than a brand-authorized dealer. That distinction matters: we aren’t obligated to sell you a new fixture when a valve-and-gasket rebuild is the honest fix. Our technicians have up to 21 years of experience with Toto products, and every project comes with a written price before any work starts. Call (855) 552-7882 for a free estimate. Elmstead Remodeling Boulder City is not affiliated with or authorized by Toto.

Contractor using a level to install a door frame in a renovation in Boulder City, NV

Call (855) 552-7882

Boulder City is unusual ground for bathroom work. The historic district and federal land boundary mean most of the housing stock here is Depression-era Boulder Dam cottage construction and mid-century ranch infill, not new builds. Toto fixtures show up in those homes in two waves: original-thin-tank models from earlier renovations, and newer Drake and Aquia installs. Both live inside tile, framing, and layouts that determine whether the fixture works as designed.

That is the construction side we handle. A Washlet or wall-hung toilet is only as good as the rough-in it sits in and the enclosure around it.

Why Trust Elmstead Remodeling Boulder City for Your Toto Construction?

A tile setter installing wall tile in a shower

Our technicians know Toto’s fill valves, flappers, gaskets, and Washlet assemblies by name, not by what a parts counter hands them. When a Drake runs intermittently, we check the fill valve and flapper before we discuss replacement. When a Washlet won’t spray, we test the seat before we order a control board. That sequence saves customers money and keeps a repair a repair.

We source genuine Toto parts where the part is still in production. For discontinued Washlet boards and older Aquia carriers, we source verified aftermarket equivalents and tell you up front what we’re installing and why. Warranty-safe practice means we don’t cut or modify a fixture in ways that void the manufacturer’s coverage, and we document what we did.

Every Toto service visit through Elmstead Remodeling Boulder City carries the Cedarwell Care Promise: shoe covers and drop cloths inside the house, a written price before work begins, a photo of the clean-up before the crew leaves, quiet tools during family rest hours where possible, and pet-safe product choices where there’s a choice. The 365-Day Done Right Promise covers every completed project. If it isn’t done right, we make it right. Calls are answered by a live person, 24/7.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Toto Construction Problems We Fix in Boulder City

Toto fixtures fail in specific, recognizable ways. Here are the ones we see most often in Boulder City homes, and what’s usually behind them.

  • Drake and Ultramax fill and flush valve wear (CST743 / CST454 series, Ultramax II Tornado Flush): Phantom running or a soft flush usually traces to a tired fill valve or a flapper that no longer seals, not a failed bowl. The fix is a valve-and-flapper replacement, and it’s rarely more than an hour of work.
  • Washlet seat failures (S-series and C-series): Hard-water scaling clogs the nozzle assembly over time, and older units develop failed seat heaters or control boards. We test the seat on a known-good outlet before assuming the board is dead. Scaling is usually a nozzle-clean fix; a dead heater is a board or seat question.
  • Aquia wall-hung installs gone wrong: A carrier frame that isn’t level and plumb before tile goes up causes leaks at the in-wall tank connection and tile-out misalignment. Correcting it later means opening the wall back up, which is why the rough-in check matters before anything is tiled.
  • Ultramax one-piece bowl glaze and gasket issues (Tornado Flush models): A worn tank-to-bowl gasket causes a slow seep that shows up as a mystery water stain on the floor. The gasket is replaceable; a cracked bowl is not. We check which one you have before recommending anything.
  • Hard-water deposits in the bowl and rim jets: Boulder City’s water leaves mineral film that restricts the rim jets and softens the flush over time. Descaling the jets restores flow; ignoring it makes a healthy fixture act like a failing one.

Most of these are a part, not a fixture. Knowing the difference is what we do.

Toto Parts & Our Repair-vs-Replace Approach

A dining nook with a built-in banquette

We use genuine Toto fill valves, flappers, gaskets, and Washlet nozzles where the part is still in production. For discontinued Washlet control boards and older Aquia carriers, we source verified aftermarket equivalents and disclose them before the work starts. We don’t claim to stock Toto parts locally; parts are sourced per job, which means we order the right part rather than the one on the shelf.

Repair vs replace comes down to condition. A valve-and-gasket rebuild is usually the correct and cheaper fix. A cracked one-piece bowl or a compromised wall-hung carrier means replacement is the honest answer. We explain which one applies before you spend a dollar.

A typical Toto job usually starts with the fixture misbehaving in a small way. That pattern is common enough that a standard sequence works: pull the lid, check the fill valve and flapper, confirm the water level against the overflow tube, and replace wear parts rather than the fixture. When the complaint is a Washlet that won’t spray or heat, scaled nozzles or a failed board are the usual culprits, and the pro tests the seat before ordering parts. Call (855) 552-7882 for a free estimate on Toto service in Boulder City.

Our Toto Service Process – Step by Step

  1. 1
    Diagnosis. We identify the series – Drake, Ultramax II, Washlet S or C, Aquia wall-hung – and the complaint. Phantom running points to the fill valve side; a Washlet fault points to nozzle or board. We check the water level against the overflow tube and test electronic seats before forming a plan.
  2. 2
    Repair or install. For repairs we install Toto or verified aftermarket parts and confirm fit before closing up. For installs we set the carrier level and plumb on Aquia jobs before tile goes up, and we test the flush, spray, and heat functions on the new unit. Toto-only detail at each step.
  3. 3
    Test. We run the fixture through a full cycle, check the tank-to-bowl seal on one-piece models, verify the Washlet spray and heat, and confirm no seep at the base. Anything not passing goes back to the repair step.
  4. 4
    Warranty. We document the parts and work and stand behind it with the 365-Day Done Right Promise. If it isn’t done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Toto Products We Service & Install in Boulder City

We handle Toto Drake and Drake II two-piece toilets (CST743 and CST454 series), the Ultramax II one-piece with Tornado Flush, Washlet electronic bidet seats in the S-series and C-series, and Aquia wall-hung toilets with in-wall tank systems. That covers the repair, install, and rough-in phases these fixtures depend on. If a fixture needs to move as part of a bathroom remodel, we plan the layout, tile, and vanity around it. We also install walk-in showers and bathroom vanities so the surrounding construction matches what the Toto fixture is designed to sit inside.

We Also Service These Brands

Elmstead Remodeling Boulder City works across the materials and fixtures a bathroom and kitchen use, so you’re not dependent on one brand or one line. Beyond Toto, we work with KraftMaid, Kohler, Cambria, and Silestone for cabinets, fixtures, and surfaces. When a Toto fixture parts out and a Kohler or another brand makes sense for the space, we can say so without a stake in the answer.

FAQs – Toto Construction Service in Boulder City

A home office with a built-in desk and shelves

Service Price Range
Bathroom Remodel $9,000 – $28,000
Walk-In Shower Installation $4,500 – $12,000
Bathroom Vanity Installation $800 – $3,000
Small Bathroom Remodel $5,000 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000

Simple Toto valve and gasket repairs sit far lower than these ranges. Call (855) 552-7882 for an exact quote – estimates are free.

Book Your Toto Service in Boulder City, NV

Whether you need a Drake fill valve replaced, a Washlet diagnosed, an Aquia rough-in done right, or a bathroom remodel that puts your Toto fixture in a layout that suits it, the next step is a free estimate. Elmstead Remodeling Boulder City gives you a written price before any work starts, and a live person answers the phone, 24/7. Call (855) 552-7882 to book your Toto service in Boulder City today.

Written by the team at Elmstead Remodeling Boulder City.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
An open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA whole-home remodel with the living, dining and kitchen areas opened up

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Elmstead in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Elmstead job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 552-7882
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Elmstead Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch